Blog

Inspection blitz targets falling objects at construction sites

Inspection blitz targets falling objects at construction sites

How to comply:

  1. Induct staff to site.
  2. Ensure PPE signage is in place and people are wearing the correct PPE.
  3. Identify the risks and controls, develop SWMS and train staff.
  4. Isolate the high risk area with barricades and install signage.
  5. Hold pre-start meetings.
  6. Inspect the site and keep records.

WorkSafe inspectors will zone in on the risk of falling building materials and equipment at construction sites that can cause injury or death during a three-week blitz across Victoria.

The first of almost 1000 inspections of commercial, residential and industrial construction sites will begin next week to ensure builders are controlling the risk of falling objects.

According to WorkSafe statistics, more than 860 construction workers have been injured since 2010 by falling objects. Injuries are commonly caused by falling building materials such as bricks, tiles, concrete and timber.

WorkSafe Executive Director Health and Safety, Marnie Williams, said ensuring loose building materials and tools were secured at building sites could make the difference between life and death.

“Each year WorkSafe investigates serious injuries and countless near-misses involving falling objects at construction sites,” Ms Williams said.

“We know that even a small tool or a bolt falling from a building site can cause life-threatening injuries. That’s why every builder must assess their site throughout the day and identify materials or objects that could fall in or outside of the site boundaries.”

Ms Williams said materials placed close to the edge of an incomplete upper level or left unsecured posed a particularly high risk.

“Materials that are blown from structures by wind or tools and equipment knocked or dropped from ledges not only pose a risk to workers but the general public in the streets below,” Ms Williams said.

“Any object, no matter how small, can be deadly if it falls from a height so builders need to constantly assess the work being undertaken to ensure these kinds of materials are secured.”

For more information on the upcoming site visits, go to www.worksafe.vic.gov.au/construction

 

Source: http://www.worksafenews.com.au/component/k2/item/545-inspection-blitz-targets-falling-objects-at-construction-sites.html

Leave a Reply

Your email address will not be published. Required fields are marked *

Series 8, It’s not for everyone. I know people enjoy spending hours creating safety plans. https://t.co/ZIaygq26pG https://t.co/sqIlyHmsel
Do it once and do it well. Create site / project specific safety management plans in minutes. S8 is here.… https://t.co/a8ZX8qelD0
Keep it real, promote it and then do it. Fake safety never works. https://t.co/MgwChMAy3d https://t.co/6MVxjaP5q3
Poor ergonomics can be as much of a risk a lifting - https://t.co/65r3SpzTHa https://t.co/dDnaS2tYHh
Safe by design has the greatest impact to ensure peoples safety and reduce your business risks… https://t.co/k7SNotk7wf
How to comply with and what you need to know about WorkSafes Inspection blitz,falling objects at construction sites. https://t.co/S29VAQ7Owx
Reducing business risk, is like painting by numbers https://t.co/rnSZdl7Pwh https://t.co/jsUC88AUge
Small business and incorporating safety can be daunting, but it doesn’t have to be. see how you are tracking https://t.co/nlI4vUs5Tx
Wrong direction? Sending employees to medical examinations https://t.co/8gf6uUASEY