Worker de-gloved after arms caught in conveyor

Worker de-gloved after arms caught in conveyor

A boilermaker was de-gloved after becoming caught in a moving conveyor in June.

The boilermaker was working alone while in the process of shutting down a crushing plant, according to a significant incident report released by the Department of Mines and Petroleum.

According to the report, the conveyor was part of the crushing circuit and adjacent to the screen deck. The worker reached between the belts with both hands, using a spanner to knock out rock that was rotating in the nip point of the conveyor’s tail-end pulley.

However, the moving conveyor had not been isolated, and both of the worker’s arms were drawn into the conveyor’s nip point.

“Fortunately, he managed to free his arms when the tail-end pulley came to a stop and was able to seek emergency assistance,” the DMP report said.

“The boilermaker was hospitalised with a de-gloving injury, friction burns and multiple fractures to his hand, arms and back.”

The incident was reported to the DMP 26 days after the event.

“Materials from the nearby screen deck were not effectively controlled, resulting in a rock landing inside the belt,” the DMP said in regards to causes of the incident.

“The build-up of material on the ground enabled easy access to the nip point of the conveyor. No isolation procedure had been developed for the conveyor.”

Direct causes were noted as the conveyor not being isolated before removal of the rock, as well as the conveyor not being guarded to prevent against moving parts.

Between January 1, 2011 and September 8, 2016 there have been 107 reported injuries at mine sites involving conveyors.


Worker de-gloved after arms caught in conveyor


Leave a Reply

Your email address will not be published. Required fields are marked *

Series 8, It’s not for everyone. I know people enjoy spending hours creating safety plans.
Do it once and do it well. Create site / project specific safety management plans in minutes. S8 is here.…
Keep it real, promote it and then do it. Fake safety never works.
Poor ergonomics can be as much of a risk a lifting -
Safe by design has the greatest impact to ensure peoples safety and reduce your business risks…
How to comply with and what you need to know about WorkSafes Inspection blitz,falling objects at construction sites.
Reducing business risk, is like painting by numbers
Small business and incorporating safety can be daunting, but it doesn’t have to be. see how you are tracking
Wrong direction? Sending employees to medical examinations